| CAS No.: | N/a |
|---|---|
| Formula: | N/a |
| EINECS: | N/a |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Paper Molding Fluorine-Free Waterproof and Oil Proof Agent FP-E06 | ||||
| Appearance | Solid content | Lonicity | PH value | Oil resistant temperature |
| opaque liquid | 45%±1% | Anion | 7-9 | Above 100 degrees |
| Reference Dosage | ||||
| Surface sizing |
2~4g/m²
|
|||
| Coating |
2~6g/m²
|
|||
| Application scope of this product | ||||
|
Widely used in the production of paper types such as pulp molding, food contact packaging paper, cup paper, etc |
||||
| Short Description | ||||
FP-E06 is a high-performance waterproof, oil resistant, grease resistant, and moisture resistant polymer used for paper and paper. Among them, the moisture-proof performance is particularly excellent. The polymer complies with FDA176.170, 176.180, and BFR XXXVI, and does not contain fluorine. The formed film is flexible, smooth on the surface, non sticky, and sealable.
1. Excellent waterproof performance: The treated paper has a waterproof surface and a very low Cobb value. Fold hard After stacking, the paper film will not break and still maintain its water resistance. 2. Oil and grease resistance: After coating treatment, we can obtain a high KIT value. In this case, FP-E06 Can replace fluororesin. 3. Strong waterproof layer: The steam flux significantly decreases after FP-E06 treatment. The film formed by heating PF-E06 is flexible, smooth, non stick, and sealable. |
||||
| Package | ||||
60kg/120kg plastic bucket, stored in a cool, dry, and ventilated place,avoiding direct sunlight. Storage temperature of 5 ºC -40 ºC to avoid freezing, storage period of six months. |
||||
| Precautions | ||||
|
1. Before using it with other additives, the compatibility must be confirmed through preliminary tests.
2. When there are hydrophilic substances remaining from previous processing on the processing cloth, it will affect the processing effect. Therefore, the cloth must be cleaned before waterproof and oil-proof processing.
3. If baking is required during processing, the baking must be sufficient, otherwise it will affect its performance.
4. Please use up the working fluid containing waterproofing agent and mixed chemicals within 12 hours. The stability and performance of the working fluid left for a long time must be confirmed before use.
5. Please use it as soon as possible after opening, and pay attention to sealing to prevent evaporation and avoid open flames and direct exposure to the sun.
6. The storage temperature is between -5ºC~40ºC and avoid freezing.
|
||||
){kind=link}